Hafnium is a shiny silver-gray tetravalent transition metal

Hafnium: Overview Hafnium, a chemical element with the symbol Hf and atomic number 72, is an element. Hafnium occurs in zirconium minerals and is a silver-gray tetravalent tetravalent. Dmitri Menedeleev predicted it’s existence in 1869. But it wasn’t discovered until 1923 by Coster and Hevesy, making it one of the last stable elements to be discovered.

Hafnium has six natural stable isotopes. These are hafnium 174. Hafnium doesn’t react with diluted hydrochloric and sulfuric acids, nor does it interact strongly alkaline. It is, however, soluble in hydrofluoric and aqua regia. This element’s name comes from Copenhagen in Latin. Hafnium’s content in the crust of the earth is 0.00045%. In nature, it is usually associated with zirconium.
Hafnium filaments and electrodes are used. Some semiconductor manufacturing uses integrated circuits which have oxides with characteristic lengths between 45 nanometers to less than that. Some special-purpose superalloys contain hafnium, niobium, titanium or tungsten.

Hafnium is a material that can absorb neutrons well in control rods for nuclear power plants. But it also needs to be removed because it will corrode the zirconium alloy, which is transparent and corrosion resistant.
What are hafnium’s Characteristics?
Hafnium has corrosion-resistant properties, is shiny and silver, malleable, and similar in chemical properties to zirconium. It also has a relativeistic effect, with the atomic radius expected to be from the fifth to first. The contraction of lanthanides nearly completely offset the expansion phase 6 of this metal. Hafnium is a shiny silver malleable metal, corrosion-resistant, and has chemical properties similar to zirconium (because it shares the same number of valence electrons, but also because of its relativistic effect; the expansion of phase 6 was almost completely offset by the contraction of lanthanides).

Chemically, hafnium is very similar to zirconium. They cannot be differentiated because they undergo different reactions. Chemically, the two elements are very similar. The main differences between them are their melting point and boiling temperature and solubility.

Hafnium makes up 5.8 parts per million of the Earth’s crust. It is not found as a pure element on Earth, but rather is solid-dissolved in natural zirconium oxides, such as ZrSiO4. Usually, Hf replaces 1-4% zirconium.

Carbonate intrusions and especially coronal polymetallic deposits at Mount Wilde, Western Australia are the main sources of zircon and hafnium ore. Hafnium can be found in rough tuff that contains zircon-hafnium ore, aluminum transparent ore, and rare zircon. This is located in the Dubbo region of New South Wales.

Hafnium reserves could be maintained less than 10 year if demand and population increase. Due to the coexistence between hafnium & zirconium in nature, hafnium may be extracted as a zirconium by-product under low demand.

Is hafnium considered a rare earth?
Hafnium, which is rare in nature, can be found at up to 5% concentration in zirconium. Hafnium is 45th on the list of most abundant elements. According to the Chemical Kuhl study, it occupies approximately 3.3 parts for every million of the earth’s crust.

Is hafnium poisonous?
Hafnium does not contain any toxic substances. Hafnium is insoluble in any liquid, including water and salt solutions. Hafnium is absorbed through the skin, eyes, and lungs. Excessive exposure of hafnium or its compounds can cause minor irritations to the eyes, skin, and mucous surfaces.

How can hafnium be used?
Hafnium works well as a neutron-absorbing material in control rods for nuclear reactors. Hafnium also serves as a getter for the vacuum tube. This material removes and combines gas from the vacuum tube. Hafnium alloys with iron, titanium, Niobium, and other metals.
Hafnium can be drawn in threads and is a shiny, silver metal. It is resistant to corrosion. Hafnium, a neutron-absorbing metal, is used in the manufacture of control rods on nuclear submarines. It is also used in plasma torch because it has a very high melting temperature.
The hafnium-isotopes are used to determine the origins of Roman glass.
Glass is an archaeologically interesting material. Although its fragility and beauty is attractive, geochemical analysis of invisible tracers can reveal far more than the surface. Rome has a very large glass industry, which produces window glass for mosaics, drinking and catering glasses, and stained-glass “stones”. The production of a high number of colorless, transparent glasses is one of the most outstanding achievements of this industry. These are especially useful to make high-quality drinkers. It is however known that there was a significant amount of Roman colored glass made in Palestine. Archaeologists found a glass-making furnace. Egypt has never been home to a furnace of this type. From a scientific standpoint, it has been difficult to differentiate the glass made in both regions.

Aarhus University and UrbNet Assistant Professor Gry Barfod, in collaboration with AGiR at Aarhus University, have now found a way to solve the problem. Their research into Roman glass found in the Denmark/Germany Jerash Northwest Project of Jordan revealed that the isotopes of the rare metal hafnium were able to be used as a way to distinguish Egyptian from Palestinian glass.

Gry barfod said, “I hope this isotope-system can leave fingerprints on sand that is used in glass production.” Charles Lescher is a professor from Aarhus University and co-author. He said that the measurement results confirm this expectation, which shows the close relationship between archaeology, geology, and history.

Hafnium has never been used to investigate ancient materials made by man, such as glass and ceramics. Professor Ian from University College London commented, “These exciting results clearly demonstrate the potential of hafnium to explain the origin of early material.” I predict they will become an important scientific tool for our study on ancient economies. component.”

The Nile River is the source of the sand that covers the Mediterranean coasts of Egypt, Israel, Lebanon, Syria, and Palestine. This sand has a high amount of calcium, which makes the glass non-degradable and stable. In the Levant they produced clear glass by adding Manganese. This is good, but it’s not perfect. Scientists now show that the second type Roman glass they have discovered comes from Egypt. Antimony (Sb) was added to make the glass transparent. It is therefore the most valuable of all glass.

(aka. Technology Co. Ltd., a trusted global chemical supplier & manufacturer has been providing high-quality Nanomaterials and chemicals for over 12 Years. Our company is currently developing a number of materials. Hafnium is a high-purity powder with a fine particle size. It also contains low impurities. Click the desired products or send us an e-mail. Sending an inquiry .

Gallium Oxide- A Semiconductor Material with Unlimited Potential

Gallium oxide The chemical formula for this inorganic compound is Ga2O3. Gallium oxide, a transparent oxide semiconductor material with broad applications in optoelectronics devices, is an oxide semiconductor.

Important Properties of Gallium Oxide

First, gallium oxide offers superior performance compared to older materials.Second is cost. Cost and value of gallium dioxide have decreased by one-seventh before the explosion.

The third is an industrialization cycle that is very short. Eight years were needed to reach the six inch goal in the material industry for gallium dioxide. In just eight years, both the size and the design of the whole device of this material have developed rapidly.

Doping is another way to improve the conductivity of gallium dioxide. Doping involves adding controlled impurities to a crystal in order to control the amount of charge carriers.

The applications of gallium oxide

Gallium oxides have a band-gap that is suitable for solarblind ultraviolet bands, and possesses an extremely strong breakdown field. It offers great advantages for solar-blind photodetection of ultraviolet light and in the preparation high-power low-loss devices.

Gallium oxide can be used in many different fields, such as rail transit, aerospace, 5G communications and high-end equipment.

Gallium oxide can be used in electronics as a semiconductor material and as a high purity analytical reagent.

A simple carbothermic method was used to prepare gallium oxide nanorods. This structure, which is similar to a nanorod, may find applications in integrated electronics.

Tech Co., Ltd. is a professional The powder of gallium oxide With over 12 year experience in chemical product research and development. We accept payment by Credit Card, T/T (West Union), Paypal, West Union or T/T. The goods will be shipped to overseas customers via FedEx or DHL.

You can contact us for high quality galium oxide powder. Contact us Send an inquiry.

What are the characteristics of selenide?

Selenide properties Selenides are compounds that contain selenium ions. Se2- is similar to sulfides in that it can only exist when strong alkaline solution exists. In neutral solution, it becomes HSe, and in acidic solutions, H2Se. Some selenides easily react with air oxygen, while metal selenides dissolve more easily than sulfides. Active metal selenide can be prone for oxidation, or to dissolves reaction. Aluminum selenide can oxidize in moist atmosphere and dissolve rapidly, releasing highly poisonous dissolve selenide gases.
Selenide minerals: types and forms
Selenide minerals co-exist in most cases with sulfide mineral. Selenide minerals include white and red selenite. Polyselenide, a compound that contains the Sen2- anion, is called polyselenide. These compounds can be made by eutecticizing elements in quartz tubes.

What are the different types of selenide? powder ?
Tongrun can provide you with powders such as antimony selenide.

Is selenide poisonous?
Selenium acts as an antagonist to some toxic substances. It detoxifies heavy metals, such as mercury and lead. It can also reduce or delay lipofuscin production, slow down the aging of cells, and help the body to absorb and organize iodine. Selenium inorganic is toxic and can lead to hair loss, rotten nails, etc. How to put out a selenide flame? If cyanide or selenide catches fire, it can’t be put out with water mist, only carbon dioxide.

Bismuth Selenide: A new material that is leading the revolution in semiconductors
Researchers used bismuth selenide. The researchers also used “sputtering”, a thin film depositing technique that is driven by momentum exchanges between ions and the atoms of the target material. It is the very first time that the sputtering technique has been applied to the production of topological insulator material that can be used by the semiconductor and magnetic materials industry. Sputtering produces nanoparticles that are smaller than six nanometers. This layer changes the behavior and physical properties of the material. The researchers discovered that this material has 18 times the efficiency of existing materials for computing processing and memory.

Selenide is a very expensive material Powder ?
(aka. Technology Co. Ltd., a trusted global chemical supplier & manufacturer has over 12 years experience in supplying super-high-quality chemicals and nanomaterials. Our company is currently developing a range of powder materials. Our OEM service is also available. Contact us if selenide is what you’re looking for. You can also click on any of the products you need to send us a request.

The Main Characteristics of Silicon Nitride

Silicon Nitride application:

Silicon nitride has many unique properties and is an important engineering ceramic. At high temperatures silicon nitride has excellent mechanical properties. These include low density, high flexural and tensile strength, high modulus elasticity, fracture toughness and high wear resistance. The material is also very tough and strong. Material also exhibits excellent thermal properties. It has minimal temperature-induced shrinkage and expansion. Finaly, silicon nitride is a material with excellent chemical properties. It can withstand most acids and alkalis as well as corrosive gases and liquid metals.

Silicon Nitride Main Characteristics

It is also a good thermal conductor, which makes it an excellent material for demanding industrial applications. Thermal conductivity is a material’s inherent ability to transfer or conduct energy. The heat transfer coefficient determines whether engineering materials are suitable for applications requiring extreme temperatures. The low thermal conductivity of silicon nitride is due to its unique chemical and microstructure composition.


The material is extremely stable due to the strong atomic bonds. It is resistant to both acid and alkaline corrosion at room temperatures. This is especially important when considering implantation of the material in a human body that has a watery and salty environment. The corrosion resistance of the material is mainly due to the formation an oxide layer at the surface. The same corrosion resistance was observed in tests where silicon nitride had been placed in hot gases and molten metallic salts. The formation of an oxide layer is crucial to the corrosion resistance.


The self-reinforced structure, high strength, toughness and other excellent properties of silicon nitride have made it a popular structural component in various industries.


Tech Co., Ltd. () has over 12 years of experience in the chemical products research and product development. We accept payment by Credit Card, T/T (wire transfer), West Union, or Paypal. The goods will be shipped to overseas customers via FedEx or DHL.


Contact us to send a request for high-quality silicon nitride.

Properties and Uses of Ultrafine PTFE Powder

What is ultrafine PTFE?

Ultra-fine polytetrafluoroethylene (PTFE) powder is a white, low-molecular-weight, free-flowing powder with stable molecular structure, excellent chemical resistance (resistance to strong acids and alkalis), good electrical insulation, and extremely high flame retardancy Performance, excellent self-lubricity, high weather resistance, aging resistance, good UV resistance, scratch resistance, scratch resistance, good hand feeling, good gloss, good thermal stability, wide temperature range ( -200- +300), and has good non-stick properties and recoatability. After the special surface treatment, the polytetrafluoroethylene (PTFE) powder not only maintains the original excellent properties of PTFE, but also has many unique properties: such as good dispersibility, good compatibility, no self-aggregation, no static electricity Effectiveness, high self-lubricity, reduced friction coefficient, etc.

Due to its high hardness, ultra-fine powder PTFE has excellent scratch resistance and antiabrasion properties. Resistance to metal scratching. Technical index: Item Index parameter: Content 99.9% Bulk densities (kg/L), 0.5 Appearance White liquid powder Average particle sizes (um), 2-5um Melting points () >=326

Use of ultrafine PTFE Powder

Useful in a variety of coatings based on solvents or powders. Examples include plastic coatings; wood paints; coil coatings; light-curable coats. It can be used as a solid instead of liquid lubricant. You can use it to improve the fluidity in the ink. It is typically added at a rate of 1-3wt% as an anti-wear agent. The coating can also be non-stick. The usual amount added is not greater than 5wt%. The organic solvent can be dispersed as a release agent. It can also act as an anti-drip agent for various plastics including environmentally friendly flame retardants such as ABS, polycarbonate PC, polyurethane PU and polystyrene PS.


The recommended dosage ranges from 0.1-5.0%. The additive is added to the process at the very beginning. For the best results, it is necessary to stir at high speed. To avoid affecting its performance, it is best to not use a sand or three-rolling mill. If needed, the organic solvent can be pre-dispersed and added as a liquid slurry to improve its performance.


(aka. Technology Co. Ltd., a trusted global chemical materials supplier & manufacture with more than 12 years experience in providing super-high quality chemicals and nanomaterials. The powder that we produce is of high purity with fine particles and low impurity. If you need lower, please Contact us.

Properties and Synthesis Method of Bismuth Oxide Nano Powder

What is bismuth oxid?

The pure bismuth trioxide (nanopowder ) is classified into three types: a, b and d. A type is yellow, monoclinic crystals with a melting point of 825. It’s soluble in both acid and water but insoluble in alkali. The b type has a bright yellow-orange tetragonal crystalline system. Relative density is 8.55. Melting point is 860. Soluble in acid, but insoluble with water. Easily reduced into metallic bismuth using hydrogen, hydrocarbons etc. The cubic fluorite structure of dBi2O3 makes it a unique material. The crystal lattice of d-Bi2O3 is void in 1/4, which gives it a high oxygen conductivity. Bismuth Oxide is mainly used for electronic ceramic powder materials. It can also be used as photoelectric materials, high temperature superconducting materials and catalysts. Bismuth is an essential additive in electronic ceramic materials. Its purity must be at least 99.15%. Main application objects include ceramic capacitors, zinc oxide varistors, and ferrite magnet materials.

The method for synthesis of bismuth dioxide

The aqueous sodium solution without carbon dioxide, which is a solution of sodium chloride in water, was mixed with the bismuth-nitrate solution at 80-90degC. The solution is kept alkaline throughout the precipitation and white bismuth hydrate (Bi(OH)3), which has a volume-swelling effect, forms. This solution is heated, stirred and dehydrated to yellow bismuth trioxide. After decantation of water, filtering, and drying the product, bismuth dioxide, is obtained.


A 0.1 mol/L Bismuth Nitrate Solution dissolved in 1 Mol/L Nitric Acid (80 to 90deg C.) was dropped into a 1.5 mol/L NaOH aqueous a solution to mix the two solutions. During precipitation, the solution remains alkaline. The white, volume-expanded, bismuth oxide trihydrate Bi(OH3) will precipitate, but it will dehydrate and turn into a light yellow bismuth trioxide after stirring in a warm solution. Wash 15 times in water without carbon dioxide or air, then filter and dry.


After melting the metal bismuth in the graphite-crucible, an arc will form between the electrode graphite and the metal’s surface. This arc will heat the metal and cause it to oxidize when oxygen is flowing. For a continuous supply of oxygen to the crucible, it should be kept in a large vessel and placed on agitator. The reaction is carried out at a temperature of 750-800degC and the b bismuth trioxide is generated quickly with a purity level of 99.8%. A high-temperature phase B-type product can then be obtained by quenching the product in water or a cold metal surface.


(aka. Technology Co. Ltd., a global supplier of high-quality chemical materials and nanomaterials with more than 12 years experience, is a trusted company. Our bi2o3 powder has high purity as well as fine particle size. If you need lower, please Contact us.

Application of Magnesium Oxide in Ceramics

What is magnesium Oxide?

Magnesium dioxide, is a non-organic compound with a chemical composition of MgO. The solid is white at room temperature. Magnesium oxide is found naturally in periclase. It is used as a raw material in magnesium smelting.

Magnesium dioxide has excellent fire resistance and insulation qualities. Magnesium oxide can be crystallized after burning at high temperatures above 1000degC. Burnt magnesia is formed when the temperature reaches 1500-2000degC. Magnesium-oxide ceramics are high-temperature resistant, have excellent conductivity and mechanical strength. They can be used to make microwave media, thick-film integrated semiconductors and glass-ceramics.


Concentrated application of magnesium oxide to ceramics

1. Magnesia and alumina of high purity are used for molten ceramic particle preparation, which is widely used in the field abrasive tool–used with rare earths oxides as an sintering assistance to prepare the Silicon nitride Ceramics. These ceramics can be efficiently and economically manufactured to make various products such as cutting tools and seal rings. They can also produce bearings, nozzles and other wear-resistant and high-temperature products.


2. Preparation of magnesia core

It is important to note that the use temperature for the Magnesia Ceramic Core must not be less than 1600°C. This core will not react with cast metals under high-temperature circumstances. Castings with silicon-based cores have a smooth surface, which compensates for the many pores and holes that are present in the internal cavity. It is easy to strip, with simple equipment and a pollution-free, non-polluting stripping process. Thermal cracking is common; the core has a high degree of precision; it will not deform or break during the handling, installation and modelling.


3. Prepare high-toughness materials by using composite stabilizers such as high-purity yttrium and magnesium oxides or rare-earth metal oxides. These stabilizers produce zirconia ceramics that have excellent mechanical properties. Ceramic materials can be used for high-temperature engineered parts and advanced refractory material.


(aka. Technology Co. Ltd., a trusted global chemical materials supplier & manufacture with more than 12 years experience in providing super-high quality chemicals and Nanomaterials. Our company’s magnesia oxide powder is of high purity with a fine particle size. If you need lower, please call us.

Titanium powder and its application

Titanium: Overview It is an element that has the chemical symbol Ti. The atomic number of titanium is 22. Its atomic number is 22. It is a lustrous, silver-colored transition metal, with low density and high strength. It resists corrosion in seawater and aqua regia.
The alloying of titanium with elements like iron, aluminum vanadium and molybdenum can create strong and lightweight alloys used for applications such as aerospace military, automotive, agricultural, medical prostheses and implants, dental and surgical instruments and files, dental implant, sporting goods, jewellery, mobile phone, and others.
Titanium and titanium alloy Powder
The metal powder titanium has many uses. Titanium is a silvery-gray powder with a high suction capacity. Titanium powder metallurgy offers the ability to produce clean, or near-clean, shaped parts. This is without the cost and material loss associated with machining parts from billets. Powders can undergo elemental blending, pre-alloying, and are then cured through metal injection moulding, hot isostatic press, direct powder forming, or laser engineering mesh form.
Titanium and titanium alloys have excellent performance in SLM and EBM. They can also be used for MIM and HIP. The best metals for 3D printing are titanium spherical particles. These powders are widely used to create high-strength materials.
Titanium powder It has been used for many years as an alloying material for many applications. With it, you can create net shape parts without any or minimal material losses that come with intricate parts created with wrought billet.

Titanium powder Preparation
The traditional method of extracting titanium powder This process is called the Kroll method. This technique is based on a temperature of up to 1040degC, and includes a number of sub-processes, such as hot isostatic press, alloying and other processes. To produce pre-alloyed Titanium powder, further methods must be used. To remove contaminants, the material is subjected the hydride/dihydride procedure, cold compaction and vacuum hot pressing. A number of metal consolidating strategies must be used to create the final product. Powder injection moulding or metal injection molding is a long-established and cost-effective method of fabricating small-sized metals to large quantities. There is also the direct powder-rolling process, which is used for the production and manufacture of sheets and plates. The laser-engineered network shaping technique can be used to quickly fabricate, enhance, and repair metal components. The components are subjected to hot isostatic presses, which are performed at high temperatures and pressure, in order to consolidate the titanium powders. To achieve the final product spark plasma sintering (also known as electric current assisted sintering) is used. This produces titanium powder with good mechanical characteristics and good grain sizes, without unwanted grain growth.
Titanium powder Application
The use of titanium powder Printing 3-dimensional auto parts is the latest breakthrough in metal manufacturing. Through 3D-printing, it is possible to produce different components and parts for automobiles, aerospace frames and engines. Titanium is still used for metal injection molding as well as powder metallurgy.

(aka. Technology Co. Ltd., a global chemical material manufacturer and supplier with over 12 year’s experience, is a trusted source for high-quality chemicals. The Titanium powder Please note that the products produced by our company are of high purity and have low impurities. Please. Contact us if necessary.

The Properties And Application of Single-layer graphene

What is a single-layer Graphene?
Single-layer Graphene is a two-dimensional honeycomb graphite made of one layer of carbon. The sp2 bond between each carbon makes it the world’s thinnest, but stiffest material (the fracture resistance is approximately 200 times higher than steel). It is nearly completely transparent and absorbs only 2.3% light. The thermal conductivity of this material is up to 5300 W/m. The K value is higher than that of carbon nanotubes or diamond. The resistivity is about 0.96×10-6 O.cm and is smaller than copper or silver. Graphene also has a high specific surface area (2630 m2/g). The graphene’s novel feature is that, in the absence doping, it is the Fermi levels located at the junction of the conduction band with the valence. At this point the electron’s mass is zero. The carrier then appears as a Dirac. Fermions can have excellent carrier conductivity and carry current densities of up to 200,000 cm2/V. In the absence carrier transmission, graphene is still conductive s=e2/h. Its Hall effect at room temperature expands its original temperature range ten-fold. This shows unique carrier characteristics as well as excellent electrical qualities. The unique electronic properties of graphene make it possible to confirm relativistic quantum-electrodynamic effects, which are hard to observe with particle physics.
The Application of Single-layer Graphene

Graphene, the most suitable material for creating nanoelectronics devices. The devices made from it are smaller and consume less power. They also transmit electrons more quickly. Graphene is a good material for high-frequency transistors. The graphene is stable even with just one hexagonal circle at the nanometer-scale, and this is very important for developing molecular electronic devices. Single-electronic components prepared by electron beam printing and etching technology may break through the limits of traditional electronic technology, and have excellent application prospects in the fields of complementary metal-oxide-semiconductor (CMOS) technology, memory, and sensors, and are expected to be the development of ultra-high-speed computer chips. The medical industry will also benefit greatly from this breakthrough.

Graphene films with a single layer can also be made into microscopic filters to decompose gasses. This thin film can be used in medical research to observe and analyze molecules using electron microscopes. It is a great tool for medical technology development. Graphene is able to detect gases with an external noise and accurately identify individual molecules. This could have applications in chemical probes and molecular sensors.

Single-layer Graphene is widely used as a semiconductor electronic package due to its excellent properties in terms of electrical, mechanical, and thermal properties.

Tech Co., Ltd. () has over 12 years’ experience in research and development of chemical products. Contact us to send an inquiry if you are interested in high-quality Single-layer Graphene.

What is zirconium nitride and its properties?

What is zirconium-nitride (ZnN)? Zirconium Nitride It is an inorganic chemical compound that has different crystal structures. The characteristics of this compound allow it to be used in various ways. ZrN is an alloy compound that has been discovered in the ZrN alloy system. Not only do they have excellent chemical characteristics, but they can also be used for junctions, diffusion stacked, cryogenic gauges etc. These compounds can be used to make metal-based and three-dimensional integrated transistors, as well as in the fabrication of electric coils. In addition, the ZrN compounds have superior wear resistance to pure zirconium, as well as corrosion and oxidation resistant. Also, they have a greater superconducting threshold temperature. value.

Zirconium Nitride properties
The resistivity of ZrN at room temperature is 12.0 uO*cm. Its temperature coefficient is 5.6*10-8O*cm/K. At 10.4 K the superconducting threshold temperature occurs. And the relaxed lattice parameters is 0.4575nm. The elastic modulus and hardness are 450 GPa. ZrN grown through physical vapor deposition is similar in color to elemental golden.

Zirconium nitride preparation
By carbothermal Nitridation, zirconium nitride nanopowders are prepared from a mixture of zirconium gel and carbon black.
ZrO2(s)+3C(s)-ZrC(s)+2CO(g)
2ZrC(s)+2N2(g)+H2(g)-2ZrN(s)+2HCN(g)

The zirconium we offer (chemical formula ZrN), is characterized by its high purity, ultrafine particle sizes, and larger surface area. The surface activity of the zirconium powder is high.

Zirconium nitride is used in the manufacture of zirconium alloys. You can also find out more about the different kinds of industries
Zirconium nitride This material is similar to titanium oxide and cement. This material is also used to make cermets, laboratory crucibles, and refractory materials. Physical vapor deposition is often used as a coating method for parts such as medical equipment (especially drill bits), industrial parts, automotive and aerospace components, and parts that are prone to corrosion. In the case of alloying with Al the electronic structure is formed from the cubic ZrN’s local octahedral bonds symmetry. As the Al content increases the bonding becomes more complex and the hardness increases.
The zirconium-nitride coating is used for burs and drills. These coatings can be deposited using physical vapor deposition. Zirconium Nitride-coated tools can be used for nonferrous metal applications. These include machining aluminum alloys such as brass, copper alloys or titanium.
Also, zirconium nitride is used to line hydrogen peroxide tanks on rockets and planes.

(aka. Technology Co. Ltd., a trusted global chemical supplier & manufacturer has over 12 years experience in providing high-quality nanomaterials and chemicals. The zirconium nitride Please note that the products produced by our company are of high purity and have low impurities. Please. Contact us if necessary.