Iron Oxide Fe3O4

The properties and applications of Iron Oxide Fe3O4

Posted on by adminLeave a comment
What is Iron O2O4 ? Iron O3O4, a type inorganic substance, has the chemical formula Fe3O4, black crystals with magnetic, and is sometimes called magnetic iron oxide. It cannot be considered Fe(FeO2)2, iron oxide FeO2O3, or as a mixture of iron dioxide FeO and ironoxide Fe2O3, although it can be roughly regarded as a compound from ferrous oxide and ironoxide (FeO *Fe2O3). The substance is not soluble in water, alkali solution or ether. Iron Oxide Fe3O4 from natural sources is insoluble when in acid solutions. However, it can be easily oxidized to Iron Oxide Fe3O4 (Fe2O3) in humid conditions. It is often used as a polish and pigment, and in the manufacture audiotapes and other telecommunications equipment.

How is Iron Oxide, Fe3O4, Produced?
Schikorr reactions produce iron oxide Fe3O4. This reaction turns iron (II), OH (Fe(OH),2) into iron oxide, II, III (Fe3O4). Anaerobic conditions cause ferrous hydroxide(Fe(OH),2) to oxidize in water and form magnetite, as well as molecular hydrogen. This process is described in Schikorr’s reaction.
3Fe(OH)2-Fe3O4 + H2 + 2H2O
What is Fe2O3 and Fe3O4 different?
Fe2O3 vs Fe3O4 are two different minerals. Fe2O3 is paramagnetic and has only Fe2+ oxidation while Fe3O4 a ferromagnetic metal with both Fe2++ oxidation.
What are some properties of Iron Oxide Fe3O4?
Fe3O4 is ferrromagnetic and has a Curie Temperature of 858K. The Verwey transition is a phase transition that occurs at 120K. This transition is where there is a discontinuity between the structure, conductivity, and magnetic properties. While many explanations have been suggested, the effect is not yet fully understood.
Although it has an electrical resistivity that is higher than iron (96.1% nOm), Fe3O4’s electrical resistance (0.3 mOm m) is much lower than Fe2O3’s (approx. kOm). This can be explained by electron exchange between FeII and FeIII centres in Fe3O4.
Iron Oxide, Fe3O4
Iron Oxide Fe3O4, commonly known as iron black, magnetite and black iron dioxide, can be used for many purposes.
Black pigments are also known as Mars Black, and Iron (II or III) oxide.
It is used in Haber processes as a catalyst.
It is used to produce the water-gas shifting reaction.
MRI scanning employs Fe3O4 Nanoparticles to contrast them.
It prevents steel rusting.
It is an element in thermite and is used to cut steel.
It can also produce special coatings, high-grade magnetic separators and microwave absorption materials.

What is Nano Iron Oxide Fe3O4 Powder?

Posted on by adminLeave a comment
Introduction toNano Iron Oxide Powder
Iron dioxide Oder ferric oxide This is a type of inorganic material, and its chemical composition is Fe3O4. It is a black crystal that has magnetic properties. This makes it also known as magnetic iron dioxide. Iron oxide is insoluble when mixed with water, alkali solution or ethanol. The natural ferricoxide is insoluble in acid solutions. It can also be oxidized to ferricoxide (Fe2O3) under humid conditions. It is often used as a polish and pigment, and in the manufacture audiotapes and other telecommunications equipment.
Ferric oxide has ferromagnetic property and is called “ferromagnetic particles” if the radius of the particles is smaller than 1 nanometer.
Powder of nano ferricoxide (Fe3O4) Magnetic and capable of generating directional movement in the external magnet field. When the particle size of the superparamagnetism is within a specified range, it can generate heat. It exhibits stable chemical performance.

Nano Iron Oxide Powder’s Physicochemical Property
Black Fe3O4 is an iron mixed-valence oxide with a melting temperature of 1597, and a density 5.18g/cm3. It is insoluble with water but easily soluble in acid. It can be found as magnetite in nature.
Fe3O4 can be produced when an iron wire is heated in oxygen.
The iron forms oxides on the surface of its surfaces when it comes into contact air. However, the oxide film is not uniformly made. Three oxide films can cover a piece low carbon steel: the metal contact FeO forms and then contacts with air Fe2O3 form. The middle is Fe3O4. Instead, it could be a mixture or saturated solid solutions of three different oxides that forms the oxide film.
However, oxide film thickness can vary according to environmental conditions. At room temperature the oxide thickness of relatively pure Iron in dry air is less than 20 angstroms. The oxide film thickness in humid air increases and can be observed as rust spots. The oxide layer stratifies at this point, with a dense, anhydrous, porous layer on one side and a thin, porous layer on another.
Iron reacts to water vapor to make Fe3O4 (and hydrogen).
Fe3O4 has anti-corrosion properties. One way to get the blue of iron or steel parts (also known by burning blue and baking bleu) is to use an oxidation of alkaline oxygenizing solution to form a layer on iron or steel parts of Fe3O4 of dark blue or blue-black Fe3O4 films. This will increase corrosion resistance, beauty and luster.
Nano Iron Oxide Powder Properties
Other names magnetic black, fenosoferric oxide, ferro ferric oxide, ferrosoferric oxide, Fe3O4
No. 1317-61-9
Formula compound Fe3O4
Molecular Weight 233.53
Appearance black powder
Melting Point 1597degC
Boiling Point N/A
Density 4.8-5.1g/cm3
Solubility of H2O N/A
Exact Mass 231.784471

Iron Oxide Fe3O4 Powder CAS 1317-61-9

Nano Iron Oxide powder preparation
A large amount of literature has been published on nano-Fe3O4 preparation since 2013. However, some new methods have also been developed. The most common methods of preparing Fe3O4 are the precipitation, hydrothermal (solvothermal), micro emulsification and sol-gel methods. The focus is shifting to new methods of preparation, including the microwave, pyrolytic carbyl pre-body, ultrasonic, pyrolytic decrease method, and pyrolytic oxidation method. There have been many breakthroughs in the production of Fe3O4 through new surfactants or preparation systems. SDS, PEG CTAB and CTAB are not the only surfactants that have been developed. NSOCMCS has also reported polyacrylamide as a modifier. Ethanol and water system; n – propanol and water system; propylene glycol and water system.

Nano Iron Oxide powder has many applications
It is a multifunctional magnet material. nano ferric oxide This has been widely used for tumor treatment, medical, and other purposes. You can use it in the following:
Useful as edible melanin
It is used as an analysis reagent in the pharmaceutical, pigment preparation and electronic industries.
It is used as the main raw material for ammonia catalyst
It is used in the production of oil color, watercolor, and ink. The coating industry is responsible for the production of primers and anti-rust paint. Construction of cement floor coloring and artificial marble. The electronics and telecommunications industries use magnetic steel as a cathodeplate for alkaline dry cell. It is used to detect flaws in steel during machine building.
It can be used to color capsule icing or tablet coloring.
Useful for coloring coatings, plastics and building surfaces.

Main supplier of Nano Iron Oxide Powder
Technology Co. Ltd. is a trusted global supplier and manufacturer of chemical materials. We have more than 12 years experience in providing high-quality chemicals, nanomaterials, and graphite.
High-quality products are what you want nano iron oxide powder Please feel free and contact us to send an inquiry. (brad@ihpa.net)